Speroni HGMG80-2.2 Self Priming Centrifugal Trash Pump 230v

The Speroni HGMG80-2.2 pumps are self-priming, mono-block, centrifugal trash pumps with pump bodies, motor supports and open impellers in cast iron. The design incorporates a rubber check valve, to maintain the priming water level, and enable automatic priming during starting even when the inlet pipe is empty. The stainless steel shafts are fitted with carbon ceramic and NBR mechanical seals.  Motors are continuously rated, have IP55 protection and incorporate an overload protection device. They are designed for pumping dirty water, with solids in suspension, at temperatures up to 90ºC. The trash pump design incorporates a removable cover for clearing debris. Solids capacity: 32mm (2.2kW). They are capable of a suction lift of 7 metres.  They are designed for many industrial and agricultural applications where large volumes of water need to be pumped.

APPLICATIONS
Self-priming monoblock water pumps with open impeller can be extracted directly from the inspection hatch. The check valve inside the suction outlet avoids the syphon effect when stopping and assures the automatic re-start each time. The pump selfprimes even if partially filled and if the suction hose is completely empty. Suitable to drain clean with solids in suspension and in flood irrigation systems.

LIMITS OF USE
Liquid temperature up to 35°C (for home use according to EN 60335-2-41) Temperature max. liquid: 90°C (for other uses) 
Ambient temperature up to 40°C 
Total suction lift up to 8 mt. 
Grain size inlet Ø 22 mm (50-1,5) 
Grain size inlet Ø 32 mm (80-2,2) 
Continuous duty

MOTOR
Single-phase 230V-50Hz 
Three-phase 230/400V-50Hz 
Two-Pole induction motor (n = 2850 min-1) 
Insulation Class F 
Protection IP 55 

MATERIALS
Pump body: Cast Iron 
Motor Support: Cast Iron 
Impeller: Cast Iron 
Shaft with motor: Stainless Steel AISI 304 
Mechanical seal: Ceramic/Graphite/NBR

PUMP DATA
Inlet 3" BSPF
Outlet 3" BSPF
KW 2.2
Voltage 230v
Flow 800 Lpm
Head 16 Hm