SUBMERSIBLE ELECTRIC PUMPS - OPEN IMPELLER

The submersible draining pumps with open impeller of the series VENEZIA® have been developed with the most advanced and sophisticated engineering and industrial design systems. The particular form, the integrated automatic switch, the possibility to operate also if partially submerged, the total absence of screws and the particular compound polymers used, make Venezia® one of the most innovative and technological advanced pumps available or the market. 
The VENEZIA® have been design to pump clear water, waste water or slightly dirty water, but not aggressive for the pump’s materials. Liquid temperature not higher than 35 °C (CEI EN 60335-2-41). 
The VENEZIA® may work also partially immerged. 
The VENEZIA® version 300 & 500 may suck water up to 2 mm. 

TECHNICAL FEATURES 
Pump body, outer motor casing and base filter Syntegum 1720 
Impeller in Dynaril
Bearings bracket in die casting aluminium UNI 5076
Motor body in stainless steel Aisi 304 
Pump shaft: stainless steel Aisi 420 F
Pump’s side mechanical seal: carbon-ceramics 
Motor’s side seal: lip ring in NBR
10 m H05RN-F feeding cable
Max. immersion 5 m 

MOTOR 
Two poles induction rewindable motor, cooled by the pumped liquid, with protection IP 68, class F insulation. 
Single-phase feeding with incorporated motor protector and capacitor permanently connected.
Continuous duty.

PUMP MODEL
Sea Land Venezia 300 Pump 202030006 240 Volts
6.4m max head
100 Lpm max flow
230 Volt 0.35 Hp 1.4 Amp motor
Integrated auto stop/start switch
Drains to 2mm on manual setting
Polypropylene body
Class F insulation, IP68
2mm free passage
5m max immersion
For clear water up to 35°C
1"1/4 outlet barb with non return valve
10m power cable