SURFACE PUMPS - SELF-PRIMING STAINLESS STEEL CENTRIFUGAL ELECTRIC PUMPS

The self-priming centrifugal electric pumps series JEXI have been designed to pump clean water from wells, even if mixed with gas 
Maximum suction up to 8-9 m
Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C 
Flow rate up to~4m3/h Heads up to~55m 

TECHNICAL FEATURES 
Pump body: stainless steel Aisi 304
Motor bracket in die casting aluminium UNI 5076 Diffuser, Nozzle & Venturi tube: Techno-polymer 
Impeller: stainless steel Aisi 304 (Techno-polymer JEXI 62-82-100)
Pump shaft: stainless steel Aisi 304 (Aisi 420F JEXI 62-82-100) 
Mechanical seal: carbon-ceramics 

MOTOR 
The control motors are asynchronous, squirrel cage-type, closed, with external ventilation
Incorporated motor protection and capacitor always on, for single-phase models
The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used
Class of insulation:F-service:S1-Degree of protection: IP 44
Terminal board protection: IP 54

PUMP DATA
42m max head
40 Lpm max flow
Self-priming, suction up to 8m
230 Volt 0.8 Hp electric motor
Stainless steel body, nitrile seals
1" female pump inlet
1" female pump outlet
Carbon ceramic mechanical seal
Techno polymer impeller
For clear water up to 60°C