SURFACE PUMPS - SELF-PRIMING STAINLESS STEEL CENTRIFUGAL ELECTRIC PUMPS

The self-priming centrifugal electric pumps series JEXI have been designed to pump clean water from wells, even if mixed with gas 
Maximum suction up to 8-9 m
Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C 
Flow rate up to~4m3/h Heads up to~55m 

TECHNICAL FEATURES 
Pump body: stainless steel Aisi 304
Motor bracket in die casting aluminium UNI 5076 Diffuser, Nozzle & Venturi tube: Techno-polymer 
Impeller: stainless steel Aisi 304 (Techno-polymer JEXI 62-82-100)
Pump shaft: stainless steel Aisi 304 (Aisi 420F JEXI 62-82-100) 
Mechanical seal: carbon-ceramics 

MOTOR 
The control motors are asynchronous, squirrel cage-type, closed, with external ventilation
Incorporated motor protection and capacitor always on, for single-phase models
The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used
Class of insulation:F-service:S1-Degree of protection: IP 44
Terminal board protection: IP 54

PUMP DATA
49m max head
50 Lpm max flow
Self-priming, suction up to 8m
230 Volt 1 Hp electric motor
Stainless steel body, nitrile seals
1" female pump inlet
1" female pump outlet
Carbon ceramic mechanical seal
Techno polymer impeller
For clear water up to 60°C