PUMPS ARE NOTHING WITHOUT CONTROL

MASSCONTROL 12V

The Mascontrol is a electronic pressure switch and protection device. Can be fitted to almost any pump with outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per min. The Mascontrol will turn off in the case of no water to protect the pump from dry running. Suitable for most water systems from well, tank or low pressure mains. A solenoid must be installed if the pump being used as a high wattage/current rating.

MODEL
12v
1.18Kw Maximum
20 Amp Maximum
1" Male BSP Inlet / Outlet
1.4Kg
Automatically turns on and off a pump
H 165mm x W 210mm x L 250mm