SUBMERSIBLE ELECTRIC PUMPS - OPEN IMPELLER - VORTEX

The submersible draining pumps with open impeller of the series VENEZIA® Vortex have been developed with the most advanced and sophisticated engineering and industrial design systems. The particular form, the integrated automatic switch, the possibility to operate also if partially submerged, the total absence of screws and the particular compound polymers used, make Venezia® one of the most innovative and technological advanced pumps available or the market. 

The VENEZIA® Vortex have been design to pump waste water, dirty water or sewage water, but not aggressive for the pump’s materials. Liquid temperature not higher than 35 °C. (CEI EN 60335-2-41). Max. free passage of suspended solids up to Ø 25 mm. 

The VENEZIA® Vortex may work also partially immerged. 

TECHNICAL FEATURES 
Pump body ,outer motor casing and base filter Syntegum 1720
Impeller in Dynaril
Bearings bracket in die casting aluminium UNI 5076
Motor body stainless steel Aisi 304 
Pump shaft stainless steel Aisi 420 F
Pump’s side mechanical seal: carbon-ceramics
Motor’s side seal: lip ring in NBR
10 m H07RN-F feeding cable
Max. immersion 5 m 

MOTOR 
Two poles induction rewindable motor, cooled by the pumped liquid, with protection IP 68, class F insulation. 
Single-phase feeding with incorporated motor protector and capacitor permanently connected. 
Continuous duty. 

PUMP MODEL
VV925 202090086
8.9m max head
200 Lpm max flow
230 Volt 0.8 Hp 2.7 Amp motor
Integrated auto stop/start switch
Polypropylene body
25mm max suspended solids
5m max immersion
Class F insulation, IP68
For dirty water up to 35°C
40mm outlet barb with non return valve
10m power cable