Pentair Waterpress / INOX Pump Pressure Booster Unit

BOOSTER SETS - FIXED SPEED

Pentair Waterpress / INOX self-priming single pump booster sets complete with pressure switch and mild painted steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a ‘break’ tank. These systems are specifically designed to boost the pressure to the water supply and deliver the correct amount to all outlets. The preset pressure switch enables it to automatically start and stop the pump. Do not allow to run dry.

Waterpress INOX pressure booster units are made with self-priming centrifugal Jetinox 60-50M pump. They are supplied wired, complete with 24L expansion tank, ready for installation and use. 

APPLICATIONS
Lifting and distribution of water in domestic systems in continuous or intermittent operation
Pressurization systems
Washing systems
Irrigation

MECHANICAL DATA
Shaft - Stainless steel  X12 CrNi1809 (AISI 416)
Impeller - Technopolymer with stainless steel shim ring
Motor housing - Did-cast aluminium
Pump housing - Stainless steel  X 5 CrNi 1810 (AISI 304)
Diffuser - Technopolymer
Mechanical seal - Graphite
Contourface - Ceramic 
Operating pressure max. - 6 bar
Type of liquid - Clean water without suspended solids or abrasive material
Temperature of the liquid max. - 50 degrees C
Suction height - 8m
Gasket - NBR 70 Shore 

ELECTRICAL DATA
Voltage - 1/N/P~230V
Power line - 1.5m H05 RN-F
Motor rating P1 - 1 kW
Motor rating P2 - 0.7kW
Current - 4.5A
Type of enclosure - IP44
Insulation class - F
Plug - Safety
Rotation speed - 2850 rpm