Piusi Ocio Electronic Fuel Tank Gauge Digital (Self Calibrated) 230V

The Piusi Ocio gauge is a versatile fuel tank level indicator suitable for use on vertical cylindrical, horizontal cylindrical and rectangular tanks up to 4m high. Whilst the standard model is designed primarily for diesel, there is an AdBlue™ tank gauge version available and a kit to make the standard Ocio compatible with oil popular in garage and workshop environments. There is also a 4-20ma output model available to allow you to send the level readings to a building management system, whereas the standard model would only send the set high/level alarm statuses to the BMS.
Please note: Tank opening needs to be a minimum 30mm diameter for balance chamber weight; 1" x 1/2" bush required for tube gland - requires min 1" female full bore opening.

If being used with HVO, the gauge should be re-calibrated as per the instruction manual based on it's SG of 0.78 (diesel is 0.84).

Features of the Piusi Ocio Electronic Fuel Tank Gauge:
Electronic fuel tank contents gauge
%, litre and mm readings
Tank probe with 10 metres capillary
½” M BSP balance chamber fitting
For tanks between 600-4000mm
Accuracy +/-1%
High/low level statuses can be set up
C/w two relays for connection to other equipment
Oil kit available to add to standard Ocio
Optional PC software available (see table)
IP54 Rated
Reading Type: 0-100%/mm/inches/litres/gal
Tank Height (mm) - 600-4000
Capillary Length (m) - 10
Capillary Type - 6 x 4 Rilsan PA12
Brass Balance Chamber Weight
Balance Chamber Fitting: 1/2" M BSP
Max Working Temperature: -20ºc/+50ºc
Diesel, water, windscreen and oil if additional oil kit is purchased