Pentair WATERPRESS / Multi EVO-A 5-50M Pump Pressure Booster Unit 230v 25 Litres

SURFACE PUMP - HORIZONTAL MULTISTAGE - PRESSURE TANK

Pentair WATERPRESS pressure booster units are made with self-priming centrifugal multistage electric pumps Multi EVO-A. They are supplied wired, complete with expansion tank, ready for installation and use. Very easy to install. Clean water without suspended solids or abrasive material.

Self-priming single pump booster sets complete with pressure switch and painted steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a ‘break’ tank. These systems are specifically designed to boost the pressure to the water supply and deliver the correct amount to all outlets. The preset pressure switch enables it to automatically start and stop the pump. Do not allow to run dry. 

MECHANICAL DATA
Shaft - Stainless steel Europe EN10088-1 X5CrNi18-10 (1.4301) USA AISI 304
Impeller - PPO reinforced with fibreglass
Motor housing - Did-cast aluminium
Pump housing - Stainless steel Europe EN10088-1 X 5 CrNi 1810 (1.4301) USA AISI 304
Diffuser - PPO reinforced with fibreglass
Mechanical seal - Carbon / NBR / SS
Contourface - Ceramic / NBR
Operating pressure max. - 8 bar
Type of liquid - Clean water without suspended solids or abrasive material
Temperature of the liquid max. - 50 degrees C
Gasket - NBR 70 Shore A

ELECTRICAL DATA
Type of enclosure - IP55
Insulation class - F
Ambient temperature max. - 40 degrees C
Rotation speed - 2850 rpm

PUMP MODEL AND TANK
Voltage 230v
Tank Size 25L Horizontal Expansion Tank
Inlet 1"
Outlet 1"
100 Lpm
55 Hm
Kw 0.95
AMP 6.2
H550 X W260 X L520mm
13 kg