Pentair Waterpress INOX 1000 60-50 Pump Pressure Booster Units 230v

SURFACE PUMPS - SELF PRIMING - PRESSURE TANK

Pentair Waterpress / INOX self-priming single pump booster sets complete with pressure switch and mild painted steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a ‘break’ tank. These systems are specifically designed to boost the pressure to the water supply and deliver the correct amount to all outlets. The preset pressure switch enables it to automatically start and stop the pump. Do not allow to run dry.

Waterpress INOX pressure booster units are made with self-priming centrifugal Jetinox 60-50M pump. They are supplied wired, complete with 24L expansion tank, ready for installation and use. 

MECHANICAL DATA
Shaft - Stainless steel X 12CrNiS 1809 (AISI 304)
Impeller - Technopolymer with stainless steel shim ring
Motor housing - Die-cast aluminium
Pump housing - Stainless steel X5 CrNi 1810 (AISI 304)
Diffuser - Technopolymer
Mechanical seal - Graphite
Contourface - Ceramic
Operating pressure max. - 6 bar
Type of liquid - Clean water without suspended solids or abrasive material
Temperature of the liquid max. 50 degrees C
Suction height max. - 8m
Gasket - NBR 70 shore

ELECTRICAL DATA
Voltage - 1/N/PE~230 V
Type of enclosure - IP 44
Insulation class - F
Ambient temperature max. - 40 degrees C
Rotation speed - 2850

PUMP MODEL AND TANK
- Voltage 230v
- Tank Size 24L Horizontal Expansion Tank
- Inlet 1"
- Outlet 1"
- 55 Lpm
- 45 Hm
- Kw 0.55
- AMP 4
- H470 X W260 X L510mm
- 15 kg