Pentair Waterpress JET 70-50 Pump Pressure Booster Unit 230v 25L

SURFACE PUMPS - SELF-PRIMING

Pentair Waterpress 70-50 self-priming single pump booster set complete with pressure switch and mild painted steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a ‘break’ tank. These systems are specifically designed to boost the pressure to the water supply and deliver the correct amount to all outlets. The preset pressure switch enables it to automatically start and stop the pump. Do not allow to run dry.

Waterpress 70-50 pressure booster units are made with self-priming centrifugal cast iron JET 70-50 pump. They are supplied wired, complete with 25L expansion tank, ready for installation and use. 

MECHANICAL DATA
Shaft - Stainless steel X 12 CrNiS 1809 (AISI 416)
Pump housing - Cast iron EN GJL 200
Diffuser - Technopolymer
Mechanical seal - Graphite
Contourface - Ceramic
Type of liquid - Clean water without suspended solids or abrasive materials
Temperature of the liquids max. - 50 degrees C
Suction height max. - 8m
Gasket - NBR 70 shore

ELECTRICAL DATA
Voltage - 1/N/PE~230V 
Type of enclosure - IP 44
Insulation class - F
Ambient temperature max. - 40 degrees C
Rotation speed - 2850 rpm

PUMP MODEL AND TANK
- Voltage 230v
- Tank Size 25L Horizontal Expansion Tank
- Inlet 1"
- Outlet 1"
- 65 Lpm
- 45 Hm
- Kw 1
- AMP 5
- H550 X W315 X L520mm
- 22 kg