Pentair Sherwood 17000K 12 Vane Neoprene Impeller Kit (Threaded / Through Key)

This genuine Sherwood impeller is the 17000K model and is supplied complete with an O-ring and a technical guide. It has 12 vanes and features a threaded/through key keyway, meaning it can be removed with an impeller puller. The neoprene impeller is designed to fit on a 20mm pump shaft and should only be used to pump water.

The Sherwood 17000K impeller is suitable for
- Sherwood P171 & P176-02 pumps used in Caterpillar 3208 engines (Caterpillar 9Y1304 & 7E4115).
- Sherwood P172 & P1710-02 pumps used in Caterpillar 3116 engines (Caterpillar 7E3268 & 4P7168).
- Sherwood P1726, P1726TC-02 & P1732-02 pumps used in Caterpillar 3126 engines (Caterpillar 113-1109, 152-8392 & 170-6116).
- Sherwood P1712 & P1716B-01 pumps used in Cummins 6B engines (Cummins 3919899 & 3922590).
- Sherwood P173 pumps used in Cummins 6C & 6B 270-450 HP engines (Cummins 3912139).
- Sherwood P1722B-01 & P1731F-01 pumps used in Cummins 6C engines (Cummins 3922589 & 4003526).
- Sherwood P1727FB-01 & P1730F-01 pumps used in Cummins 6C & 6B 270-450 HP (Cummins 3897194 & 3866493).
- Sherwood P1711 pumps used in John Deere 6081AF engines (John Deere RE45458).
- Sherwood P1719-01 pumps used in John Deere 6081AFM & 6125AFM engines (John Deere RE45459).
- Sherwood P1719F-01 pumps used in John Deere 6.8L 300 HP engines (John Deere RE515657).
The genuine Sherwood replacement impeller for 09-704BT, 630, 18958-0001, 7600-01, 23-3303 and 23-2002.

Sherwood marine raw water pumps all feature a flexible neoprene impeller which attaches to the shaft. The shaft rotation powers the impeller which transfers the water by creating a vacuum on the inlet side and then forcing water out in a uniform flow on the outlet side. As such an important component, you should ensure that your pump impeller is always in top condition and that you always use the correct impeller for your application. This will help to ensure the best engine performance and prolong engine life.

Sherwood recommend that all impellers are replaced at least annually (depending on application) to maintain impeller performance, however it is good practice to inspect them often to check for excessive abrasions or damage. It is also recommended that during long periods of being unused, impellers should be removed from the pump housing to prevent ultraviolet deterioration, vanes setting into position and copper bonding of the impeller to the housing. Any issues with your impeller can lead to engine overheating, which is the main reason for premature engine wear.

Material - Neoprene with Inserted Thread
Type - Neoprene Impeller Kits
Brand - Sherwood
Primary Construction - Neoprene
Impeller Shaft Diameter - 20mm
Number of Impeller Blades - 12
Contents - 1 x 17000 Impeller, O Ring, Technical Guide & Plug
Diameter Description - 84mm (3-5/16"), Shaft 20mm (3/4")
Drive Type Description - Key Drive
Model - 17000K
Depth - 73mm (2-7/8")