Johnson 10-24190-1 Circulation Pump C090P5 12V 38mm Hose

Non-stocked - 5 week average lead time

Heavy Duty Mechanical Seal Circulation Pumps with Brushed motors for continuous use. These centrifugal pumps are ideal for installation in recreation vehicles and buses etc for use as circulating pumps e.g. when cooling fresh water and for water in heating systems. All-round pumps that can be used wherever self-priming is not essential.

The C0 pumps are normal-priming centrifugal pumps and should be mounted in a manner that ensures that they are always flooded or else be primed before being switched on.

The pumps should not be used for sea-water or other heavy soiled liquids.

Note! The pump must never be run dry.

CAUTION! Do not pump gasoline, solvents, thinners, highly concentrated or organic acids. If corrosive fluids must be handled, pump life will be prolonged if flushed with water after each use or after each work day.

Designed for continuous operation - 2500hr service life rated.

Technical Specifications
Pump body: PA66 thermoplastic
Impeller: PA66 thermoplastic
Shaft: Stainless Steel
Shaft seal: Mechanical seal
Motor: 12/24V DC enclosed (as per IP31) permanent magnet, ball bearing mounted motor
Liquid temp.: Min -30°C, Max+100°C
Pressure & Capacity (based on water at 20°C/68°F)
CE marked according to the following standards:
EN55014: 1993/Radio disturbance
72/245/EEG, 95/54/EG Electromagnetic compatibility