Jabsco 50270-2211 Bronze Clutch Pump 12V 2" BSP Single B

Non-stocked - 2 week average lead time

.Jabsco 12V foot mounted clutched pump for bilge and deckwash applications. The pump has 2" BSP female ports and is 270mm long with a 180mm pulley diameter (1B pulley) and 173mm across the ports. The Jabsco clutched pump is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head.

This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids.

Fuse - 5A
Height Description - 132mm (5.2") Excluding Pulley
Length - 264mm (10.4")
Series - 50270 Series
Size - Pulley Size: Single B Section (16mm)
Type - Clutch Pumps
Voltage Description - 12V DC
Width - Excluding Pulley: 170mm (6.7")
Brand - Jabsco
Clutched Pump Pulley Size - Single B Section - 16mm
Automatic Bilge Pumps - No
Bearing Type - Heavy Duty
Maximum Pump Head - Over 4.27 Metres
Seal Type - Mechanical Seal
Warranty - 1 Year
Flow Rate 3 Metre Head - 16,020 LPH (3523 US GPH) at 1500 RPM
Maximum Recommended Head - 25 Metres (82 Feet)
Model - 50270-2211
Replacement Impeller - JAB-17936-0001
Self Primes up to - 3 Metres (9.8 Feet)
Inlet Outlet - 2" BSP Female Thread