Hypro Jet Agitator 3371

Thorough mixing is achieved using the Hypro Jet Agitator. To be effective, the jet agitator by-pass must be on a separate line, not on the end of tank of spray material is mixed, try to use the entire contents of tank before stopping. Don't allow the suspension to settle and harden. If entire contents can't be used, then close valve to tank suction line and flush pump, hoses and boom to prevent settling in these areas. Stir tank contents by hand with a paddle to put the materials back in suspension before you start the pump again.

The correct nozzle will provide ample agitation to maintain sulution suspension. The volume boosting jet agitator output is approximately three gallons of water for every gallon entering the agitator. Model 3371 includes three nozzles and a spacer ring. 

Supplied with 3 jet sizes

1/2" female thread inlet 

3/4 "male thread outlet 

Polypropylene construction