SELF-PRIMING VOLUMETRIC VANE BATTERY PUMPS

Self-priming volumetric vane pump fitted with a by-pass valve integrated within the pump body. Enclosed motor with permanent magnets, 24V. IP55 protection. Ideal for mounting into plant equipment , excavators etc.

GENERAL FEATURES
Power supply 24V
Flow rate 40 l/min

FLUIDS
Diesel fuel or biodiesel up to B30

TECHNICAL DATA
Voltage - 24v
Current -max - 13A
Motor weather protection rating - IP55
On/Off switch - Yes
Length of cable - No
Fuse in cable - No
Duty cycle [min] - S2 30
Flow rate [l/min] - 40
Max pressure [bar] - 1.3
Vacuum, dry height [m] - 2
Built in bypass valve - Yes
Pump inlet port [BSPP] - 3/4
Pump outlet port [BSPP] - 3/4
Material pump housing - Cast iron
Material rotor - Steel sint.
Material vanes - POM
Material shaft seal - HNBR
Material other seal - NBR
Built in filter - No
Discharge hose - No
Suction hose - No
Pump mounting feet - Yes
Fluid viscosity max - Diesel fuel
Approved fluids - Diesel
Forbidden fluids - Gas, alcohol, water
Operating temperature min/max [C] -  -20/+50
Sound level, max from 1 metre [dB] - 75
Net weight of pump only [kg] - 3.1
Gross weight of shipping package [kg] - 3.4