SURFACE PUMPS - SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS

The self-priming centrifugal electric pumps series JET have been designed to pump clean water from wells, even if mixed with gas. Maximum suction up to 8-9 m.
Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C.  
Flow rate up to ~ 9.5 m3/h.
Heads up to~60m. 

TECHNICAL FEATURES 
Pump body: cast iron G20 with anti-corrosive coating.
Motor bracket: in die casting aluminium UNI 5076 (cast iron for JET 152-302).
Diffuser, Nozzle & Venturi tube: Techno-polymer.
Impeller: Techno-polymer (stamped brass UNI-EN 12165 JET 152-302).
Pump shaft: stainless steel Aisi 420F (Aisi 304 for JET 152-302). 
Mechanical seal: carbon-ceramics. 

MOTOR 
The control motors are asynchronous, squirrel cage-type, closed, with external ventilation
Incorporated motor protection and capacitor always on, for single-phase models.
The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used.
Class of insulation:F-service:S1-Degree of protection: IP 44.
Terminal board protection: IP 54.

PUMP MODEL
JET 122M 120120000
60m max head
50 Lpm max flow
Self-priming, suction up to 8m
230 Volt 1.2 Hp electric motor
Cast iron body, nitrile seals
1" female pump inlet
1" female pump outlet
Carbon ceramic mechanical seal
Techno polymer impeller
For clear water up to 60°C