SURFACE PUMPS - SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS

The self-priming centrifugal electric pumps series JET have been designed to pump clean water from wells, even if mixed with gas. Maximum suction up to 8-9 m.
Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C.  
Flow rate up to ~ 9.5 m3/h.
Heads up to~60m. 

TECHNICAL FEATURES 
Pump body: cast iron G20 with anti-corrosive coating.
Motor bracket: in die casting aluminium UNI 5076 (cast iron for JET 152-302).
Diffuser, Nozzle & Venturi tube: Techno-polymer.
Impeller: Techno-polymer (stamped brass UNI-EN 12165 JET 152-302).
Pump shaft: stainless steel Aisi 420F (Aisi 304 for JET 152-302). 
Mechanical seal: carbon-ceramics. 

MOTOR 
The control motors are asynchronous, squirrel cage-type, closed, with external ventilation
Incorporated motor protection and capacitor always on, for single-phase models.
The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used.
Class of insulation:F-service:S1-Degree of protection: IP 44.
Terminal board protection: IP 54.

PUMP MODEL
JET 202T 12020200
160m max head
50 Lpm max flow
Self-priming, suction up to 8m
415 Volt 2.0 Hp electric motor
Cast iron body, nitrile seals
1"1/2 female pump inlet
1" 1/4 female pump outlet
Carbon ceramic mechanical seal
Techno polymer impeller
For clear water up to 60°C